DIALOG AP-225 - Active 2.1 speakers
| Model | AP-225 |
| Power RMS, W | 65 |
| Bluetooth support | Yes |
| FM radio | Yes, with telescopic antenna |
| USB support | Yes |
| SD card support | Yes. SD, + miniSD & microSD (via adapter - sold separately) |
| Amplifier | Built-in |
| Components | Subwoofer, 2 satellites |
| SNR | >80 |
| Harmonic distortion | not more than 0.3% at 1 W and a bandwidth of 1 kHz |
| Power supply | Built-in |
| Inputs | Stereo input (2RCA), USB port for flash drives; SD card slot |
| Controls | subwoofer: power (on rear side), volume knob with backlight, input source switching, pause / play, forward / backward (on the tracks or radio stations); Remote: detailed description - see user manual |
| Remote control | IR remote |
| Indicators | information display on the front panel of the subwoofer |
| Power cable length (m) | 1.5 |
| Subwoofer | |
| Loudspeaker(s) | 5.25″ |
| Power (W) | 35 |
| Impedance (Ohm) | 4 |
| Frequency range(Hz-Hz) | from 20 Hz |
| Run-out material | Paper |
| Phase inverter | Pipe on side panel, D=50mm, L=100mm |
| Case | MDF, 9mm |
| Overall dimensions (H*L*D, mm) | 360*310*170 |
| Weight (kg) | 4.80 |
| Satellites | |
| Loudspeaker(s) | 3″ |
| Power (W) | 15 |
| Impedance (Ohm) | 4 |
| Frequency range (Hz-kHz) | up to 20 kHz |
| Run-out material | paper |
| Phase inverter | Pipe on rear panel, D=30, L=40 mm |
| Case | MDF, 6 mm |
| Grill | not removable, black fabric |
| Overall dimensions (H*L*D, mm) | 200*115*115 |
| Weight (kg) | 0.70 |
| Supplied parts | subwoofer, two satellites with cables, cable for connection to a signal source 2RCA-> 3.5 mm stereo jack, remote control, 2xAAA batteries (non-rechargeable), user manual/warranty card, packing |
Product card from www.dialoginvest.com